Prusament PC Blend size 1.75mm 1 kg.
ABOUT PC BLEND
Prusament PC Blend (PolyCarbonate) is the perfect material for stronger more durable 3D prints.
Polycarbonates are a group of plastics that are known for their strength mechanical durability toughness and temperature resistance. They are commonly used for the production of CDs protective goggles or car headlights.
The composition of pure polycarbonate is a material not suitable for 3D printing. It adheres very poorly to the print sheet and due to its high thermal expansion it has a tendency to deform and crack. We have added carefully-picked additives into the mix improving the adhesion and reducing cracking and warping while still maintaining the excellent properties of polycarbonate.
Prusament PC Blend is suitable for advanced users. If you are new to 3D printing we recommend you to stick with easier to print materials such as PLA and PETG. PC Blend is recommended for experienced 3D printer owners looking for tough durable material for production of prototypes and functional parts thermally and mechanically stressed components.
Print sheet preparation
Prusament PC Blend can be printed on both smooth and textured print sheets. However it’s required to spread a separating agent on the sheet before you start printing otherwise the adhesion of the print may be too strong. The best way to prepare your print sheet is to apply a thin layer of paper glue onto the sheet. This is why we bundle a paper glue stick (KORES) to every PC Blend spool for free. Failing to add a separating layer may lead to the damage to your print sheet! While our documentation states that it’s not advised to apply glue onto the powder-coated textured steel sheet the PC Blend is an exception. Do not use the glue onto the powder-coated textured steel sheet when printing with other materials (PLA PETG ASA Flex and others)!
After you finish printing and remove the object from the print sheet use isopropyl alcohol to clean the print sheet thoroughly! Avoid cleaning the textured sheet with water - it may lead to corrosion.
This PC Blend is made in-house by Prusa Research.
1.75 mm filament is manufactured with a precision of ±0.03 mm.
Note that some tiny black particles may be visible in the filament material. These are a side effect of a normal manufacturing process they exist already in the pellets from which the filament is made. Its only a visual imperfection they have no negative impact on printability or mechanical qualities.
Printer Setup
Nozzle 275+-10c Bed 110c
หากต้องการใบกำกับภาษีเต็มรูปแบบ
1.ใบกำกับภาษีจะแนบไปพร้อมสินค้าในกล่องพัสดุ
2.ตอนสั่งซื้อหน้าชำระเงิน ตรงช่องด้านล่างจะมีเขียนว่า “หมายเหตุ” ให้เขียนแจ้งความต้องการ เช่น ขอใบกำกับภาษีเต็มรูปแบบ
3.แล้วก็แจ้งข้อมูลที่จะให้ออกบิลทางช่องแชทร้าน
4.ใบเสร็จจะแนบไปพร้อมกับสินค้าในกล่องพัสดุครับ